Audio Converter

By Asira Tools Team · Last updated 20 November 2026

Convert audio files between formats — WAV, M4A, OGG, and FLAC to MP3 or WAV — free, in your browser, with nothing uploaded.

Advertisement

Audio Converter

Drop an audio file here or click to choose one

No file chosen yet. Maximum file size 2 GB.

Choose an audio file to convert it
Input file—
Output file—

Your audio never leaves your device — conversion runs entirely in your browser. The first conversion loads the converter (about 30 MB); later conversions start right away.

Commands used:

To MP3: ffmpeg −i input.flac −vn −c:a libmp3lame −q:a 2 output.mp3

To WAV: ffmpeg −i input.m4a −vn −c:a pcm_s16le output.wav

WAV size = 44,100 × 16 × 2 ÷ 8 = 176,400 bytes per second (CD quality, stereo)

What Does an Audio Converter Do?

An audio converter changes an audio file from one format to another: a WAV recording becomes an MP3, a FLAC file becomes a WAV, an M4A voice memo becomes an MP3 that plays anywhere. The sound stays the same — the same recording, the same length — but the way it is stored changes, which changes the file size, the compatibility, and whether the audio loses any quality in the process.

Audio formats exist because different jobs need different trade-offs. WAV stores sound with no compression at all, so the quality is perfect and the files are huge. MP3 throws away detail nobody can hear and makes files roughly a tenth of the size. FLAC compresses without throwing anything away, landing in between. This tool converts between the formats people actually need: WAV, M4A, OGG, and FLAC in, and MP3 or WAV out.

How to Use This Converter

Drop an audio file onto the upload area or click it to choose one from your device. The tool accepts WAV, M4A, OGG, FLAC, MP3, AAC, Opus, WMA, and AIFF files. Choose the output format — MP3 for compatibility and small files, WAV for editing and archiving — then press Convert Audio. The first conversion in a session loads the converter (about 30 MB); after that, conversions start immediately.

Audio converts quickly: a song usually takes a few seconds, and even an hour-long recording takes well under a minute on a modern device. When the conversion finishes, a download button appears with the size of the finished file. The output keeps the original file name with the new extension, so track.flac becomes track.mp3. If you convert another file, download the first result before starting the next one, because the download link is replaced each time.

How the Conversion Works

This converter runs entirely in your browser using ffmpeg.wasm, a version of the ffmpeg media toolkit compiled to WebAssembly so it can run inside a web page. When you press Convert, your audio file is loaded into the browser's memory, ffmpeg decodes it, re-encodes it in the format you chose, and hands the result back as a download. Your file is never uploaded to a server, so there is no upload wait, no queue, and no copy of your recording on anyone else's computer.

One detail worth knowing: the conversion drops any embedded cover art. M4A and FLAC files often carry a picture of the album cover inside the file, and this tool's conversion keeps only the audio. The sound is unaffected — the cover picture is simply not carried over. If the cover art matters to you, keep the original file alongside the converted one.

The Audio Formats, Explained

MP3 is the most widely compatible audio format ever made. It uses lossy compression: it analyzes the audio and discards detail that most listeners cannot hear, typically shrinking a recording to about a tenth of its uncompressed size. Every phone, computer, car stereo, and smart speaker plays MP3. This tool encodes MP3 at variable bitrate quality V2, averaging about 190 kbps, which most listeners cannot distinguish from the original.

WAV is uncompressed audio, usually at CD quality: 44,100 samples per second, 16 bits per sample, two channels (stereo). That works out to 44,100 times 16 times 2 divided by 8, which is 176,400 bytes per second — about 10.6 MB per minute, or about 635 MB per hour. The quality is perfect, because nothing is thrown away, which is why WAV is the format for editing, archiving, and professional work. The cost is size: a WAV file is roughly seven times larger than the same recording as a 190 kbps MP3.

FLAC is lossless compression: it shrinks a WAV file to typically about half its size without discarding a single bit of audio. A FLAC file decoded back to WAV is bit-for-bit identical to the original. It is the best format for archiving music, but it is less widely supported than MP3 — some older car stereos and players cannot play it, which is the usual reason to convert FLAC to MP3.

M4A usually holds AAC audio, the format Apple devices and streaming services prefer. AAC compresses slightly better than MP3 at the same quality, but M4A files can confuse older Windows software and some car players. OGG usually holds Vorbis audio, an open format that sounds good but is poorly supported outside of computers and games. Both are worth converting to MP3 when compatibility matters.

Worked Example

Take a five-minute recording saved as a WAV file at CD quality. Its size is 176,400 bytes per second times 300 seconds, which is 52,920,000 bytes — about 52.9 MB. Converting it to MP3 at about 190 kbps gives 190,000 bits per second times 300 seconds divided by 8, which is 7,125,000 bytes — about 7.1 MB. The MP3 is roughly one-seventh the size, and in normal listening it sounds the same.

Now take the same five minutes as a FLAC file. Lossless compression typically halves the WAV size, so the FLAC is roughly 26 MB. Converting that FLAC to MP3 gives the same 7.1 MB MP3 as converting from WAV — the FLAC and the WAV contain identical audio, so the MP3 comes out identical too. And converting an MP3 back to WAV would produce a 52.9 MB file that sounds exactly like the 7.1 MB MP3: the WAV wrapper cannot restore the detail that MP3 compression removed. That is the key insight of audio conversion — the output can never sound better than the input, it can only match it or lose a little more.

When to Convert to MP3

Convert to MP3 when compatibility is the goal. An MP3 plays on everything, sends easily by email or message, and uploads to any platform without complaint. It is the right format for sharing a recording, for putting music on an older device, for a podcast episode, or for any file that other people need to open without fuss. The smaller size also helps: a folder of MP3s takes a fraction of the storage of the same recordings as WAV.

Convert to MP3 from FLAC when you want the music on a device that does not support FLAC, and from M4A or OGG when you are tired of explaining to people that their player cannot open the file. In all of these cases, converting from a lossless or high-quality source to MP3 at 190 kbps loses almost nothing audible.

When to Convert to WAV

Convert to WAV when you are about to edit the audio. Audio editors work best with uncompressed audio: every cut, fade, and effect is applied to the full-quality sound, and you export to MP3 only once, at the very end. Editing an MP3 directly and exporting it as MP3 again loses quality with each round trip, because every MP3 encoding throws away a little more detail.

Convert to WAV when a tool or service demands it. Some transcription services, voice assistants, podcast tools, and older hardware accept only WAV input. In that case, converting first is simpler than fighting the upload form. Note, though, that converting an MP3 to WAV does not improve it — the WAV is just the MP3's audio in a bigger container — so only convert to WAV when the destination needs it or when you plan to edit.

Privacy and Limits

Your audio is processed entirely in your browser and never uploaded to any server. That is not a privacy promise — it is how the tool is built. There is no upload step, no account, and no server-side processing, so voice memos, interviews, and private recordings stay on your own device.

The limits are practical ones. Files must be under 2 GB, a limit of the WebAssembly runtime that runs the converter — for audio, that is generous: 2 GB holds about three hours of uncompressed CD-quality WAV. The first conversion in a session downloads about 30 MB of converter code, so the first run needs an internet connection. The tool works in current versions of Chrome, Edge, Firefox, and Safari on desktop and mobile.

Tips for Better Results

Always convert from the best source you have. A FLAC or WAV source makes a better MP3 than an M4A source, because the encoder starts from the full-quality audio. If you have both a FLAC and an MP3 of the same recording, convert from the FLAC.

Never convert lossy to lossy if you can avoid it. Turning an MP3 into an M4A, or an OGG into an MP3, throws away detail twice. The result sounds worse than a direct conversion from a lossless source, and the file is not even much smaller.

Keep the original. Conversion is a one-way street for quality. Keep the FLAC or WAV original so you can make a different version later without stacking losses.

Use WAV as the editing format, MP3 as the sharing format. Convert to WAV, do your editing, then export or convert to MP3 once at the end. If you need to trim the result, the MP3 Cutter cuts without re-encoding, and the Audio Joiner merges several files into one.

Common Mistakes to Avoid

The most common mistake is converting MP3 to WAV to "improve" the sound. It does not work: the detail MP3 compression removed is gone forever, and the WAV is just a much larger file of the same sound. The only honest reason to convert MP3 to WAV is that the destination requires WAV, or that you are about to edit.

The second mistake is converting the same file back and forth. Each lossy conversion loses a little quality, and the losses accumulate — an MP3 converted to M4A and back to MP3 sounds noticeably worse than the original. Pick the format you need and convert once, from the best source available.

The third mistake is choosing the wrong direction: converting a WAV to MP3 and then deleting the WAV. The MP3 is a fine listening copy, but the WAV is the master. Storage is cheap; keep the lossless original and make MP3 copies from it whenever you need them.

Advertisement

Frequently Asked Questions

Will converting to MP3 reduce the sound quality?

Slightly, but at this tool's setting (about 190 kbps) most listeners cannot hear the difference in normal listening. MP3 is lossy, so a tiny amount of detail is discarded — but converting from a lossless source like WAV or FLAC keeps the loss minimal.

Can I convert MP3 to WAV to improve the quality?

No. Converting MP3 to WAV makes a much larger file that sounds exactly like the MP3, because the detail MP3 compression removed is gone forever. Convert to WAV only when a tool requires it or when you plan to edit the audio.

Why is the WAV file so much bigger than the MP3?

WAV is uncompressed: CD-quality stereo WAV takes 176,400 bytes per second, about 10.6 MB per minute. A 190 kbps MP3 of the same audio takes about 1.4 MB per minute — roughly one-seventh the size.

Is my audio uploaded to a server?

No. Conversion runs entirely in your browser using ffmpeg.wasm. Your file never leaves your device, so voice memos, interviews, and private recordings stay private.

Does the converter keep the album cover art?

No. The conversion keeps only the audio stream, so embedded cover art from M4A or FLAC files is not carried over. The sound is unaffected — only the picture is dropped.