Gravel & Mulch Calculator

By Asira Tools Team · Last updated 20 November 2026

Work out how much gravel, mulch, or topsoil you need for a driveway, path, or garden bed — in cubic yards, tons, and bags.

Advertisement

Gravel & Mulch Calculator

2.04 cubic yards
Volume55.00 cu ft
Volume (metric)1.56 cu m
Estimated weight5,500 lb (2.75 tons)
Bags needed110 bags (0.5 cu ft each)

Results are estimates. Weights assume the densities shown; wet material weighs more. Gravel is sold in 0.5 cu ft bags, mulch and topsoil in 2 cu ft bags.

Formulas:

Volume (cu ft) = Length (ft) × Width (ft) × Depth (in) ÷ 12, plus waste allowance

Volume (cu yd) = Volume (cu ft) ÷ 27

Weight (lb) = Volume (cu ft) × material density (lb per cu ft)

Bags needed = Volume (cu ft) ÷ bag size, rounded up

What Does a Gravel and Mulch Calculator Do?

A gravel and mulch calculator works out how much loose material you need to cover an area to a given depth — for a gravel driveway, a garden path, a mulched flower bed, or a layer of fresh topsoil. You enter the length, the width, and the depth, and it gives you the volume in cubic feet, cubic yards, and cubic metres, the estimated weight in pounds and tons, and how many bags you would need if you buy bagged instead of bulk.

The volume is the number that matters most, because bulk material is sold by the cubic yard. A cubic yard is 27 cubic feet — a pile 3 feet long, 3 feet wide, and 3 feet high. Suppliers deliver by the yard, and most charge a delivery fee, so ordering the right number of yards the first time saves both money and a second delivery. The weight matters too: it tells you whether your truck or trailer can carry the load, and whether the ground underneath can take it.

How to Use This Calculator

Measure the area in feet: the length and the width of the space you want to cover. For an irregular shape, split it into rectangles, work out each one, and add them together. Then choose the depth in inches — the guide below gives typical depths for each job — and pick your material. The waste allowance defaults to 10 percent, which covers settling, spillage, and uneven ground; raise it to 15 percent for rough ground or a first-time gravel driveway over bare soil.

The headline result is cubic yards, because that is how bulk suppliers sell. If the result is under about half a cubic yard, bags from a garden center may be cheaper than a bulk delivery once the delivery fee is counted — the bag count in the results tells you exactly how many you would need.

How Deep Should Gravel and Mulch Be?

Depth depends on the job. For a gravel driveway, 3 to 4 inches is standard over a compacted base; less than 3 inches and the gravel migrates and thins out under tires, more than 4 inches and the surface feels loose and hard to walk on. A first-time driveway over bare soil often needs a 4-inch base layer of larger crushed stone with a 2-inch top layer of smaller gravel — 6 inches total — to stop the stone sinking into soft ground.

For a garden path, 2 to 3 inches of gravel or pea gravel is enough: it covers the ground, suppresses weeds, and stays comfortable underfoot. For a decorative gravel bed with no foot traffic, 2 inches is plenty.

For mulch in a flower or shrub bed, 2 to 3 inches is the standard recommendation from gardeners and extension services. Less than 2 inches does not suppress weeds or hold moisture well; more than 4 inches can suffocate plant roots and hold too much water against stems. A 3-inch layer is the usual target, and because mulch decomposes and settles, it needs topping up by about an inch each year.

For topsoil, the depth depends on what you are growing: 4 to 6 inches of good topsoil is enough for a lawn, while vegetable beds and new shrub plantings want 8 to 12 inches. Topsoil is usually bought to level a lawn or fill a raised bed rather than to cover a large area thinly.

How Much Does a Cubic Yard Cover?

One cubic yard — 27 cubic feet — covers a different area depending on the depth. The relationship is simple: area in square feet equals 324 divided by the depth in inches. So one cubic yard covers 324 square feet at 1 inch deep, 162 square feet at 2 inches, 108 square feet at 3 inches, 81 square feet at 4 inches, and 54 square feet at 6 inches. These are the numbers to memorize if you buy bulk material often, because they let you estimate an order in your head: a 10 by 10 foot bed at 3 inches needs 100 divided by 108, or just under 1 cubic yard.

Weight varies far more than volume, because materials differ in density. This calculator uses 100 lb per cubic foot for gravel and crushed stone, 95 lb for pea gravel, 20 lb for mulch, and 80 lb for topsoil. In cubic yards, that works out to about 2,700 lb (1.35 tons) per yard of gravel, 2,565 lb (1.28 tons) per yard of pea gravel, 540 lb per yard of mulch, and 2,160 lb (1.08 tons) per yard of topsoil. Wet material weighs more — saturated topsoil can reach 100 lb per cubic foot or more — so treat the weights as estimates for dry to damp material.

Worked Example

Say you are mulching a flower bed 20 feet long and 5 feet wide, 3 inches deep. The area is 100 square feet. The raw volume is 20 times 5 times 3 divided by 12, which is 25 cubic feet. Add the 10 percent settling allowance and the order becomes 27.5 cubic feet, or 27.5 divided by 27 — 1.02 cubic yards. At 20 lb per cubic foot, the mulch weighs 550 lb, or 0.28 tons. If you buy 2-cubic-foot bags instead, you need 27.5 divided by 2, rounded up — 14 bags.

Now a gravel driveway: 30 feet long, 12 feet wide, 4 inches deep. The raw volume is 30 times 12 times 4 divided by 12, which is 120 cubic feet; with a 10 percent allowance, 132 cubic feet, or 4.89 cubic yards. In pea gravel at 95 lb per cubic foot, that weighs 12,540 lb — 6.27 tons. As 0.5-cubic-foot bags it would be 264 bags, which shows why bulk delivery is the only sensible option for a driveway: a bulk order of 5 cubic yards costs far less than 264 bags and arrives in one truck.

Bulk Delivery or Bags?

Bulk is cheaper per cubic foot by a wide margin — typically a third to a half of the bagged price — but it comes with a delivery fee, often $50 to $100, and a minimum order, often 1 cubic yard. Bags make sense for small jobs: anything under about half a cubic yard, or a top-up where you need just a few bags. Bags are also easier to handle if the material has to go through a gate or up steps that a dump truck cannot reach.

For bulk delivery, think about where the truck will dump the pile. A cubic yard of gravel makes a pile roughly 3 feet across and 2 feet high; five yards makes a substantial heap. Have tarps ready if the pile will sit on a driveway or lawn, and plan the wheelbarrow route before the truck arrives — a wheelbarrow holds about 2 cubic feet, so moving 5 cubic yards takes about 68 trips.

Tips for a Good Result

Put down landscape fabric first. Under gravel or mulch, a layer of permeable landscape fabric stops weeds coming through and stops the material sinking into the soil. It is cheap insurance that pays for itself in the first year.

Edge the area. Gravel and mulch migrate without edging — into the lawn, onto the path, into the flower beds. Metal, plastic, or stone edging keeps the material where it belongs and makes the finished job look sharp.

Compact gravel in layers. For a driveway, spread gravel in layers no more than 3 inches thick and compact each layer with a roller or a plate compactor before adding the next. A single thick layer never compacts properly at the bottom and will rut under tires.

Common Mistakes to Avoid

The most common mistake is forgetting the waste allowance. Ground is never perfectly level, some material always spills, and mulch settles by as much as a third in the first few months. An order calculated with zero waste will run short — and a second delivery costs more than the extra material would have.

The second mistake is measuring depth in feet instead of inches, which gives a volume 12 times too large, or entering the area in square feet as the length. If the answer looks wildly wrong, check the units first.

Finally, do not pile mulch against tree trunks or plant stems — the "mulch volcano" that smothers bark and invites rot and pests. Keep mulch 2 to 3 inches away from stems and trunks, and taper it to a thinner layer near the base of plants.

Advertisement

Frequently Asked Questions

How many cubic yards of gravel do I need for a 10x10 area at 3 inches deep?

0.93 cubic yards before waste (10 x 10 x 3 / 12 = 25 cubic feet, and 25 / 27 = 0.93). With a 10% allowance, order 1.02 cubic yards — in practice, 1 cubic yard is close enough for this size.

How much does a cubic yard of gravel weigh?

About 2,700 lb (1.35 tons) for standard gravel at 100 lb per cubic foot. Pea gravel is slightly lighter at about 2,565 lb per yard, while mulch is far lighter at about 540 lb per yard.

How deep should mulch be in a garden bed?

2 to 3 inches. Less than 2 inches does not suppress weeds or hold moisture well, and more than 4 inches can suffocate roots and hold too much water against stems. Top it up by about an inch each year as it decomposes.

How many bags of mulch are in a cubic yard?

About 13.5 bags of 2 cubic feet each (27 / 2 = 13.5). For a small bed under half a cubic yard, bags can be cheaper than a bulk delivery once the delivery fee is counted.

Should I order extra gravel for a driveway?

Yes — 10% is standard, and 15% for a first-time driveway over bare soil. Gravel settles, compacts under tires, and migrates to the edges, so an order with no allowance will thin out within the first year.