Rebar Weight Calculator

By Asira Tools Team · Last updated 20 November 2026

Work out how much your rebar weighs — per foot and in total — so you can price it, transport it, and plan the lift.

Advertisement

Rebar Weight Calculator

133.6 lb
Weight per foot0.668 lb/ft
Total length200 ft
Total weight (kg)60.60 kg
Total weight (tons)0.07 tons

Weights are the ASTM A615 standard nominal weights per foot. Tons are US short tons (2,000 lb).

Formulas:

Total weight (lb) = Length per bar (ft) × Number of bars × Weight per foot (lb/ft)

Weight per foot ≈ 2.67 × diameter² (diameter in inches), or use the ASTM table values

Weight (kg) = Weight (lb) × 0.45359237  ·  Tons = Weight (lb) ÷ 2,000

What This Rebar Calculator Does

Rebar — reinforcing bar — is steel rod buried inside concrete to give it tensile strength. It is sold by weight, priced by the ton, and delivered by the truckload, so knowing how much your bars weigh matters for the budget, for the delivery, and for the crew that has to carry them. This calculator takes the bar size, the length of each bar, and the number of bars, and gives you the total weight in pounds, kilograms, and US short tons, plus the weight per foot and the total length.

The weights come from the ASTM A615 standard, which fixes a nominal weight per foot for every bar size. Those figures are what suppliers use to price and weigh orders, so the calculator's answer should match your supplier's scale within a fraction of a percent. The small difference that remains is because real bars vary slightly in diameter along their length — the standard allows a small tolerance either way.

How to Use the Calculator

Pick the bar size from the list. The size number tells you the diameter in eighths of an inch: a #4 bar is 4/8 inch, or half an inch, across, and a #8 bar is 8/8 inch, or a full inch. Then enter the length of each bar — 20 feet is the standard stock length, though 40-foot bars are common on larger jobs — and the number of bars. The results update as you type.

The headline result is the total weight in pounds. The kilograms figure is there for metric jobs and for anyone comparing prices with a supplier who quotes in tonnes, and the tons figure uses US short tons of 2,000 lb, which is the unit American suppliers price by. If your supplier quotes in metric tonnes (1,000 kg), divide the kilograms figure by 1,000 instead.

Rebar Sizes and Weights

The table below lists every size this calculator covers, with the nominal diameter and the ASTM weight per foot. Notice how fast the weight grows: a #8 bar is twice the diameter of a #4 bar but weighs four times as much per foot, because weight grows with the square of the diameter. That is why stepping up one size is a much bigger change in steel weight — and cost — than it looks.

There is a handy formula behind these numbers. Steel weighs about 0.283 lb per cubic inch, and a foot of bar is a cylinder 12 inches long, so the weight per foot is roughly 2.67 times the diameter squared (with the diameter in inches). For a #4 bar: 2.67 × 0.5² = 2.67 × 0.25 = 0.668 lb/ft, which matches the table exactly. You can use this formula to check any size, including metric bars.

Worked Examples

Start with a small slab job: ten #4 bars, each 20 feet long. The total length is 10 × 20 = 200 feet, and at 0.668 lb per foot the total weight is 200 × 0.668 = 133.6 lb. In kilograms that is 133.6 × 0.45359237 = 60.60 kg, and in tons it is 133.6 ÷ 2,000 = 0.067 tons. One person can carry a single 20-foot #4 bar — it weighs 13.36 lb — but the bundle of ten is a two-person lift.

Now a footing job: twenty-five #5 bars, each 12 feet long. The total length is 25 × 12 = 300 feet, and at 1.043 lb per foot the weight is 300 × 1.043 = 312.9 lb, or 141.93 kg, or 0.156 tons. And for a heavy job, six #8 bars at 40 feet each: 240 feet at 2.67 lb per foot is 640.8 lb — 290.66 kg, or 0.32 tons. A single 40-foot #8 bar weighs 106.8 lb, which is a two-person carry and needs a truck or trailer with a long enough bed.

Which Rebar Size Do I Need?

The size depends on the job and on what the plans or the building code call for — never guess on structural work. As a rough guide, #3 bar is used for light slabs, driveways, and patios where the steel is mainly controlling cracks. #4 bar is the most common residential size: slabs, footings, foundation walls, and columns. #5 bar appears in heavier footings, retaining walls, and beams. #6 and larger are for commercial work, bridges, and heavy foundations, and they are almost always specified by an engineer.

Grade matters too. Most rebar sold in the US is Grade 60, which has a yield strength of 60,000 psi. Grade 40 (40,000 psi) is still found in some regions for light work. The grade does not change the weight — a #4 Grade 40 bar weighs the same as a #4 Grade 60 bar — but it changes how much load the bar can carry, so do not substitute grades without checking the design. If your project also needs the grid layout, the concrete slab calculator works out how many bars a slab needs at your chosen spacing.

Buying and Handling Rebar

Rebar is sold by weight, usually priced per ton, with a minimum order at many suppliers. Prices move with the steel market, so get a fresh quote for every job — a price from six months ago may be well out of date. Suppliers also charge for cutting and bending, so if you need bars cut to length or bent into stirrups and hooks, ask for the fabricated price rather than the straight-bar price.

For transport, remember that a 20-foot bar needs a 20-foot bed or a trailer. Most pickups cannot carry full-length bars legally or safely without a bed extender and a red flag on the overhang. Many suppliers deliver, and for orders over a few hundred pounds delivery is usually worth it. Store bars off the ground on timber dunnage and under cover if possible: surface rust is normal and harmless — it actually improves the bond with concrete — but heavy scaling rust should be brushed off before the pour.

Common Mistakes to Avoid

The most common mistake is confusing bar sizes with diameters. A #4 bar is half an inch across, not 4 inches, and a #8 bar is one inch across. The number is eighths of an inch, so divide by 8 to get the diameter. Ordering #8 when you meant #4 gives you four times the steel weight and a much bigger bill.

The second mistake is forgetting laps and waste. Bars are joined by overlapping them — typically 30 bar diameters, which is 15 inches for a #4 bar and 30 inches for a #8 bar — and every lap uses extra steel. Add 5 to 10% to the calculated length for laps and cutting waste, especially on jobs with many short pieces.

The third mistake is mixing up short tons and metric tonnes. A US short ton is 2,000 lb; a metric tonne is 2,204.6 lb. On a 10-ton order, that difference is over 2,000 lb of steel. Check which unit your supplier's price is quoted in before you compare quotes.

Advertisement

Frequently Asked Questions

How much does a 20-foot #4 rebar weigh?

13.36 lb. A #4 bar weighs 0.668 lb per foot, so 20 feet is 20 x 0.668 = 13.36 lb. Ten such bars weigh 133.6 lb.

What does the number on rebar mean?

The number is the diameter in eighths of an inch. A #4 bar is 4/8 inch (1/2 inch) across, a #5 bar is 5/8 inch, and a #8 bar is 8/8 inch (1 inch).

How much does #5 rebar weigh per foot?

1.043 lb per foot. A 20-foot #5 bar weighs 20.86 lb, and 100 feet of #5 bar weighs 104.3 lb.

How do you calculate rebar weight?

Multiply the total length in feet by the weight per foot for the bar size. The weight per foot is about 2.67 times the diameter squared (in inches): for a #4 bar, 2.67 x 0.5 squared = 0.668 lb/ft.

Is rebar sold by weight or by length?

By weight, usually priced per US short ton (2,000 lb). Suppliers cut bars to length from stock, and the price covers the total weight of steel, including any cutting and bending charges.