Tile Calculator
Work out how many tiles and boxes a floor or wall needs — for any tile size — with a waste allowance for cuts and breakage.
Tile Calculator
Waste covers cuts around edges and fixtures plus breakage. Use 10% for a straight grid layout, 15% for a diagonal layout or a room with many obstacles.
Formulas:
Area (sq ft) = Length (ft) × Width (ft)
Tile area (sq ft) = Tile length (in) × Tile width (in) ÷ 144
Tiles needed = Area ÷ Tile area, plus the waste percentage, rounded up
Boxes needed = Tiles needed ÷ Tiles per box, rounded up
What This Tile Calculator Does
Tiles are sold by the box, but floors are measured in square feet — and the tile size decides how the two relate. A 12 by 12 inch tile covers exactly one square foot, so a 100 square foot floor needs 100 tiles before waste. A 6 by 6 inch tile covers a quarter of a square foot, so the same floor needs 400. This calculator does that conversion for any tile size, adds a waste allowance for cuts and breakage, and tells you how many boxes to buy.
The waste allowance is the part people most often get wrong. Tiles have to be cut wherever the floor meets a wall, a fixture, or a doorway, and every cut risks a broken tile. A straight grid layout in a square room wastes about 10%; a diagonal layout, where every edge tile is cut at an angle, wastes 15% or more. The calculator applies the waste before working out the box count, so the number of boxes already includes the spares.
How to Use the Calculator
Measure the room in feet, length by width. For an L-shaped room, split it into two rectangles, work out each one, and add them together. Then enter the tile size in inches — 12 by 12 is the most common floor tile, 6 by 6 is common for small bathrooms, and 24 by 12 is popular for large open floors. Enter the tiles per box from the box label, and set the waste allowance: 10% for a straight layout, 15% for diagonal or for a room with many obstacles.
The results update as you type. The headline number is the tile count, and the box count is what you actually order. Tiles are sold in full boxes, so the box count always rounds up — a job needing 105 tiles from boxes of 10 means 11 boxes, and the 5 leftover tiles become spares for future repairs.
How Many Tiles per Square Foot?
It depends entirely on the tile size. The area of one tile in square feet is its length times its width in inches, divided by 144 (the number of square inches in a square foot). A 12 by 12 tile is 144 ÷ 144 = 1 square foot, so one tile per square foot. A 6 by 6 tile is 36 ÷ 144 = 0.25 square feet, so four tiles per square foot. A 24 by 12 tile is 288 ÷ 144 = 2 square feet, so half a tile per square foot.
Here are the common sizes and what they mean for a 100 square foot floor, before waste:
- 6 × 6 in (0.25 sq ft): 400 tiles
- 12 × 12 in (1 sq ft): 100 tiles
- 12 × 24 in (2 sq ft): 50 tiles
- 18 × 18 in (2.25 sq ft): 45 tiles (44.44, rounded up)
- 24 × 24 in (4 sq ft): 25 tiles
Larger tiles mean fewer tiles, fewer grout lines, and faster laying — but they are heavier, harder to cut, and less forgiving of an uneven floor. Smaller tiles conform better to slight unevenness and give more grip underfoot, which is why small tiles are common in showers.
Worked Example: A 12 × 8 Bathroom
Take a bathroom 12 feet long and 8 feet wide, tiled with 6 by 6 inch tiles, a 15% waste allowance, and 20 tiles per box. The floor area is 12 × 8 = 96 square feet. Each tile covers 6 × 6 ÷ 144 = 0.25 square feet, so the floor needs 96 ÷ 0.25 = 384 tiles before waste. With 15% waste, that becomes 384 × 1.15 = 441.6 tiles, rounded up to 442. At 20 tiles per box, that is 442 ÷ 20 = 22.1 boxes, rounded up to 23 boxes.
For a bigger job, a 20 by 12 foot living room with 24 by 12 inch tiles and 5% waste: the area is 240 square feet, each tile covers 2 square feet, so 120 tiles before waste and 126 after. At 8 tiles per box, that is 126 ÷ 8 = 15.75 boxes, rounded up to 16 boxes. Compare the two jobs: the living room is 2.5 times the area of the bathroom but needs fewer than a third as many tiles, because the tiles are eight times larger.
How Much Waste Should I Allow?
Ten percent is the standard for a straight grid layout in a room with few obstacles. Go to 15% if the layout is diagonal, if the room has many fixtures to cut around — a bathroom with a toilet, a vanity, and a tub wastes more than an empty bedroom — or if the tiles are fragile natural stone that breaks easily during cutting. For a herringbone or other complex pattern, allow 20%.
Waste is not just breakage. Every tile cut to fit an edge produces an offcut, and offcuts are only reusable if another edge needs exactly that size. In a room where the tile grid does not divide evenly into the room dimensions, every row ends in a cut tile, and the offcuts pile up. You can reduce waste by planning the layout first: dry-lay a row of tiles across the room and shift the starting point so the cut tiles at each end are similar sizes and as large as possible.
Tips for Ordering Tile
Buy from one batch. Like paint and brick, tile color and size vary slightly between production runs. Tiles are marked with a batch or shade number on the box — check that every box has the same number. A shade difference between batches can be visible across a floor.
Keep spares. The leftover tiles from rounding up to full boxes are not waste — they are your repair stock. Tiles get chipped and cracked over the years, and the exact tile may be discontinued by the time you need a replacement. Keep at least a few spares, and note the manufacturer and color code.
Do not forget grout and adhesive. This calculator counts tiles only. As a rough guide, a 25 lb bag of thinset adhesive covers about 90 to 100 square feet with a 1/4 inch notched trowel, and a 25 lb bag of grout covers about 100 square feet at a 1/8 inch joint — though grout coverage depends heavily on the joint width and the tile size. Ask the tile supplier for the coverage figures for your specific products.
Check the return policy. Most tile suppliers accept returns of unopened boxes. That makes it safe to round up and buy the extra box rather than risk running short mid-job.
Common Mistakes to Avoid
The biggest mistake is measuring the room but forgetting to account for the grout lines. Grout joints add a small amount to the coverage — a 1/4 inch joint on a 12 inch tile adds about 4% to the area each tile covers — but this calculator ignores joints, which means it slightly overestimates the tile count. That is deliberate: the overestimate acts as a small extra buffer on top of the waste allowance.
The second mistake is tiling over an uneven or flexible floor. Tiles are rigid, and they crack if the floor beneath them moves or dips. Concrete floors should be level within 1/8 inch over 10 feet; wood floors need a cement backer board to stiffen them. Fix the floor first, or the tiles will fail within a year.
The third mistake is starting in a corner. If you start tiling from one corner, the cut tiles all end up on the opposite side, and they may be thin slivers that look bad and break easily. Instead, snap chalk lines to find the center of the room, dry-lay the tiles from the center out, and adjust so the border tiles are as wide as possible on all sides.
Frequently Asked Questions
How many 12x12 tiles do I need for 100 square feet?
100 tiles before waste, or 110 tiles with a 10% waste allowance. A 12x12 tile covers exactly 1 square foot, so the tile count equals the area, plus waste.
How much tile waste should I add?
10% for a straight grid layout, 15% for a diagonal layout or a room with many obstacles, and 20% for complex patterns like herringbone. Waste covers cuts, breakage, and offcuts that cannot be reused.
How many 6x6 tiles are in a square foot?
4 tiles per square foot. A 6x6 tile covers 36 square inches, and there are 144 square inches in a square foot (144 / 36 = 4).
How do I calculate tiles for an L-shaped room?
Split the room into two rectangles, work out the area of each, and add them together. Then divide the total area by the area of one tile and add the waste allowance.
Should I buy extra tiles beyond the waste allowance?
Yes, keep the leftovers from rounding up to full boxes as spares. Tiles get chipped over time, and the exact tile may be discontinued later. A few spare tiles and the grout color code are worth keeping.